If Yanhua Mini ACDP-2 fails to connect PC via USB cable and appears no device found problem, how to solve? Check the available solution below.
Problem:
Connect ACDP2 host to computer via USB cable
Open PC-ACDP2 software and wait for dozens of seconds, but the device is still not connected.
Click “Settings >> PC bound to ACDP-II device”, but the device list is still without any information.
The solution:
This problem can be solved by modifying the device IP.
Step 1: Right-click the Network icon in the lower right corner of computer
Then click Open Network & Internet settings >> Change adapter options
Step 2: If you don’t know which Network is Mini ACDP 2, try to unplug and plug the USB cable of device once. You can see the ACDP2 network when inserting it.
Step 3: Right-click ACDP 2 network>> Properties>> Internet TCP/IPv4
Use the following IP address:
- IP address: 192.168.88.88
- Subnet mask: 255.255.255.0
- Default gateway: 192.168.88.1
Use the following DNS server addresses:
- Preferred DNS server: 192.168.88.1
Enter the above device IP address and DNS correctly, and click OK.
Wait for a few seconds until the device automatically connects.
Successfully connected!
