Factory plan to upgrade the key code database of SEC-E9 Key Cutting Machine from 26th June 2017.
( Please note: this upgrade is only for database, without software).
After upgrade, the Software version is 11.0.0.0, Database version is 15.09.Newly added key data includes: Scion, Toyota, Lexus, Renault, Nissan, Acura, Subaru, Chrysler
After upgrade, the Software version is 11.0.0.0, Database version is 15.09.Newly added key data includes: Scion, Toyota, Lexus, Renault, Nissan, Acura, Subaru, Chrysler
Kindly Note:
1.If the software version is not 11.0.0.0 in touch screen version, you can not do upgrade for your machine directly. Please contact the manufacture about the upgrade details.
2.If the machine prompts out of memory during upgrade, the upgrade cannot be done successfully. Please contact with manufacture for returning back the touch screen to empty the memory then upgrade.
3.This upgrade only for standard SEC-E9 key cutting machine, customize machines will have special upgrade file. please contact the manufacturer directly if yours is customized machines.
1.If the software version is not 11.0.0.0 in touch screen version, you can not do upgrade for your machine directly. Please contact the manufacture about the upgrade details.
2.If the machine prompts out of memory during upgrade, the upgrade cannot be done successfully. Please contact with manufacture for returning back the touch screen to empty the memory then upgrade.
3.This upgrade only for standard SEC-E9 key cutting machine, customize machines will have special upgrade file. please contact the manufacturer directly if yours is customized machines.
Let we start: how to update SEC-E9 to v15.9 step by step:
please prepare a USB flash disk between 2G to 8G for E9 upgrade. The specification is 2.0, not 3.0.
Step 1: Please go official website(http://user.kkkcut.com/EN/Login.aspx) to enter member login interface. Please input your email address and password to enter login. You will see upgrade information in home page.
Step 2: Download the upgrade file named your serial number to your USB flash disk.
Step 3: Put the mouse cursor on the upgrade file, click the the right mouse button and choose unzip to current file. You will get a folder named “AutoUpdate”. Please make sure the folder is in your USB flash disk. In this way, your USB flash disk is ready for upgrade.
Step 4: Turn on your E9 to enter the Home Page, and wait for 15 seconds.
Step 5: Plug the USB flash disk with “AutoUpdate” folder into one of rectangle USB connnectors to back of your E9, and wait for 15 seconds.
Step 6: Press the button “Setup” on home page to enter setup interface, press the botton “Update” and click “start upgrade”. Then it will upgrade automatically. 
Tip① As there are large new added key data to update, it will take 4 to 5 minutes . Please kindly be patient even if you find the progress bar doesn’t move.
Tip② Please do not cut off power source during upgrade, or it will cause upgrade failure, and the machine needs be sent back to factory for repair possibly.
Note : The upgrate process is fully automated, you don’t need to do anything, please wait for the upgrate process done.
Step 7: After upgrade, the screen will show “Finishing update. Please wait…” When E9 enter the Home page, you can pull USB flask disk out.
Now SEC E9 upgrade is finished.
Attention: this update method only fit for SEC E9 7' Touch Screen Key Cutting Machine, if your SEC E9 is 8' Tablet PC Bluetooth version, please check the Steps to Update SEC E9 to V15.09-8' Tablet PC Bluetooth Version Only
And the SEC E9 Key Cutting Machine sold on www.eobdtool.co.uk is 8' Tablet PC Bluetooth Version
