How to erase Mercedes-Benz CR3XX engine computer with Launch X431 IMMO Elite?
Check the step-by-step guide below.
Kindly notice:
This function doesn’t support operating in the vehicle. Remove the module from the vehicle to perform on the platform.
Make sure the network is well connected during the operation.
1.Connection:
Connect X431 IMMO Elite, X-prog3 programmer and DBScar VII properly
Select IMMO>> European>> MERCEDES-BENZ>> MERCEDES-BENZ V10.15>> ECU Erasing>> Engine Control Unit>> Wiring Diagram>> CR3.XX
Follow the diagram to connect X431 GIII and Benz CR3.XX engine computer
2.Back up module data and erase module
Select Completely Erase Module
Read the vehicle info successfully
The corresponding value of Personalized and Activated are Yes.
Networking to calculate and erase the password…
Backup the module data successfully
Then continue to erase module
Now the corresponding value of Personalized and Activated are No, which indicates the Mercedes-Benz CR3.XX engine computer data has been successfully erased by Launch X-431 IMMO Elite.
X-431 IMMO Elite also erased Mercedes-Benz ISM computer perfectly.
How to Erase Mercedes-Benz ISM computer with Launch X431 IMMO Elite?
