How to use Lonsdor K518 Pro and LT20-10 8A-BA (4/5/6 BTN) smart remote to add smart key to 2023 Toyota Landcruiser 300? Check the step-by-step guide below.
Menu function path:
Immo & Remote>> TOYOTA>> Select from vehicle>> Other>> LAND CRUISER>> Smart Key>> CGJ300>> PEPS (CAN)>> Add smart key
Operation guide:
Make sure the K518 Pro is well connected to network before operation!
During the use this function, please do not operate abnormally, or maliciously steal relevant dat, otherwise, the K518 will be locked and cannot be unlocked.
Keep vehicle fully charged, in case of the faults caused by low battery power
Turn ignition switch on
Load the read D-Flash data of PEPS to acquire 12-bit PIN code
Select the file
Check the current key count, the registered keys is 4, and the count of registered keys is 3
Hold the registered key’s back closer to Start button, when buzzer beeps once, take the key away from the button.
Within 30s put the key (to be registered) back closer to Start button, when the buzzer beeps once, take the key away from the button
Operation is completed, and the count of the registered keys is 5, and the count of registered keys is 2
Turn ignition off, and check if the key works properly, if it doesn’t have remote function, follow the prompts to operate
Use the same method to register another key
Register key successfully, and the count of registered keys is 6 now
Finally, check if every function works well
- Turn on dashboard
- Remote function
- Start function
Alright! That’s the whole process to program smart key to 2023 Toyota Landcruiser 300 by K518 Pro key programmer and Lonsdor LT20-10 8A-BA remote.
