Question:
Frankly for NCS Expert I totally floundering …. that's why I wanted a tutorial in French ..
I have an E53 X5 so rain sensor, headlights washer installed, xenons lights; Bluetooth module installed by me but that does not work ….
How to Handle
So for starters, I recommend you read the ECU ncs with different expert and save them in case of bad coding.
(Namely, it is the manipulation for E89 series but it should not really change.)
1: Lance NCS Expert
2: File: load profile: expertenmodu or revtor
3: F1 and F3: Choose your series and CAS
4: F6
5: F4 then select ECU
6: F4 to ECU reading and close the hex file that appears
Then go ncsexpert \ work folder and copy the file and rename the FSW_PSW.TRC the name of the selected ECU. Ex: CAS Original.TRC
Repeat the same manipulation for the other boxes.
Once all this is: coding
For the bluetooth: I do not know what type of install you did exactly but begins by ECU this list for your series and then we'll see.
To sunroof when it rains:
1: Lance NCS Expert
2: File: load profile: expertenmodu or revtor
3: F1 and F3: Choose your series and CAS
4: F6
5: F4 then select ECU FZD
6: F4 to ECU reading and close the hex file that appears
Then go ncsexpert \ work folder and right click, open it with notepad FSW_PSW.TRC
Find:
REGENSCHLIESSEN
nicht_aktiv
Change in:
REGENSCHLIESSEN
aktiv
Automatic closing roof opening with rain sensor (rain sensor service)
To test the operation, put the ice essuis automatic and throw water on the rain sensor.
And also reset the roof by pressing for at least 2 minutes on the button to crack it performs all its cycles (not release the button until it is returned to its closed position).
And eventually:
Find:
REGENSCHLIESSENTIL
nicht_aktiv
Change in:
REGENSCHLIESSENTIL
aktiv
Automatic roof closing the opening in Trigger wiper essuis
Do next file, save as
File name: FSW_PSW.MAN
File type: all files (important)
Back in NCSExpert:
F5 and choose coapiReadSgGetFswPsw “ok then a window that opens.
F2 and choose SG_CODIEREN
F3 to start writing code
Once finished it will be marked coding coding ended
For lava headlights:
1: Lance NCS Expert
2: File: load profile: expertenmodus or revtor
3: F1 and F3: Choose your series and CAS
4: F2 – Enter FA, your serial and VIN OK
5: Added $ 502, Ok
6: F6: Back
7: F4: Process and CAS ECU
8: F2 – Change Job
9: FA_WRITE
10: F3 – Execute Job
11: F1 – Change ECU then FRM
12: F3 – Execute Job
Restart NCS Expert
Load Profile
expertenmodus or revtor
F1 – WINE / ZCS / FA
F3 – ZCS / FA f.ECU
Your series
CAS
F6 – Back
F3 – For Process
We choose the ECU that is used by the option that is added to (eg FRM for xenon lights aftermarket) See therefore what ECU is the flagship lava, I would say FZD can be too.
F2 – Change Job
SG_CODIEREN
F3 – Execute Job
Finally, more than to test it.
