Zed-Bull Key Programmer Clone ID46 to a TPX3 Transponder

Multi-language zed-Bull car key program tool support pin code reading for both Hyundai and KIA. As an immobilizer system, Zed-Bull also supports 8c and 8e chip distinguish function. Below I will show you how I clone ID46 to a TPX3 Transponder with PC software.
Follow the guide below step-by-step:
1. Open Zed-Bull software;
Click “READ” and then “Write”
Confirm the selection of “TPX-3”;
Click OK;
Automatically Pop out Zed-BULL 46 Client window;
Select MANUF, MODE and YEAR as HYUNDAI ACCENT 2010;
Click “COPY”;
NOTE: Writing transponder IDE. Do not move the TPX-3 transponder during
process.

 

2. Stick the original key and TPX3 together;

Insert the key and turn ignition on/off for 5 times;
Take out the key;
3. Back to PC software and click OK;

 

Click “COPY”;
NOTE: Please put the original key to Zed-BULL antenna and do not remove
during process.
Until pop out message reading Transponder cloning is successful.
Search for more Zed-Bull information, you can have a stay at obdtool.

eobdtool.co.uk