New Xhorse VVDI RKE BOX €22.99 free shipping worldwide

New tool by Xhorse Company!

VVDI RKE BOX by Xhorse Company sales for only €22.99 free shipping worldwide at eobdtool.co.uk, details at:

http://www.eobdtool.co.uk/wholesale/vvdi-rke-box.html

Package as follows.

vvdi rke box user manual and function

vvdi-rke-box-1

遥控钥匙转接盒使用说明01

Xhorse VVDI RKE BOX is applied at the following aspects:

  1. To change the original straight remote control to folding remote
  2. No method or apparatus temporarily to add a new remote control
  3. Temporary replacement because of the original out of stock
  4. Only one remote for the original car (such as the Chinese, Besturn, etc.)
  5. To seek low-cost remote control instead of the expensive original one

Note: at least one original remote control for use of the kit

  1. Wiring method:

Remove the circuit boards in the original remote control, and connect to the main unit as the right picture shows (connect the white wire to buttons, red to the positive, black to the negative)

wiring-diagram-02

Note: 3 kinds of remote button: 2-feet, 4-feet and 5 feet buttons

4-feet and 5-feet buttons: no direction distinction, but it must be soldered at the diagonals

4pin-and-5pin-03

2-feet buttons: no direction distinction, and respectively solder the two feet

2pin

  1. The optional method to get power:

Via OBD or 12V constant power from the car

  1. Key/ remote matching and clearing

Matching keys procedure:

Step 1: Press SET button on the Host box (in the internal hole at the side of unit), then the buzzer beep twice, to go into the matching state

Step 2: Press any button on the new remote for a while until the buzzer beep continuously. Key matching is completed.

Step 3: Repeat the previous two steps to add another new key.

Note:

1): Up to six keys to match for one Host box; the key matching will fail if more

2) In the matching state, the buzzer beeps one time if the key cannot be detected for more than10 seconds, and then automatically exits the matching state to go into the normal working state.

Clearing keys procedure:

Press SET button for a while until the buzzer beep continuously. All the keys matched previously are cleared and return to factory state

Note:

If the key is lost or not to use, you can erase all the keys and then re-add all lost keys to ensure safety.

match and erase

  1. To add the key embryo and anti-theft chip to the remote control

This is from obdtool: Best car diagnostic tools for sale website technical support: New Xhorse VVDI RKE BOX €22.99 free shipping worldwide

eobdtool.co.uk