OBDSTAR P50 supports one-click airbag reset for 38 brands and 4600+ ECU part No by OBD or Bench. Toyota is also involved in. This post will share two tests report on Toyota ECU.
1.OBDSTAR P50 Reset TOYOTA 89170 60460 Airbag on Bench
2.OBDSTAR P50 Reset TOYOTA 89170 0E080 Airbag on Bench
Device and accessories required:
OBDSTAR P50 Airbag Reset Tool
OBDSTAR P004 adapter+ P004 jumper
Main cable
Toyota 89170 60460 (43)/89170 0E080 (Y9) Airbag ECU
Important!
Keep P50 in charging and communication in the whole process.
Menu function path:
Select Airbag Reset>> All>> Airbag Reset icon>> Airbag Reset V30.32 (newest version)>> Auto Search Part Number
Input the part number of ECU (case insensitive, fuzzy search supported)
Note: the part number can be found on the ECU label.
Before repairing the airbag computer, please carefully check the [Operation instructions].
Both the related operation steps and wiring diagram can be checked there. Just follow it to operate step by step.
Step 1: Read ECU info and DTC to confirm whether crash record data/crash fault exits
Step 2: Read flash and backup flash data
Step 3: Refer to the write flash mode wiring diagram, confirm that there is a wiring diagram corresponding to the ECU, and then proceed to the next step
Step 4: Erase crash
Step 5: Refer to the write flash mode wiring diagram, remove the resistance at the specified position, and weld the 10k resistance.
Step 6: Write flash
Step 7: Erase DTC
Step 8: Read ECU info and DTC again to check if the crash record data/crash fault has been cleared
Toyota 89170 60460 wiring diagram
Toyota 89170 0E080 wiring diagram
1.Read ECU information- OK
Read out the crash recorded is YES
2.Read DTC- OK
3.Read Flash and backup data- OK
Disconnect the 12V power supply of P004 adapter (turn off the ignition) and wait for 30 seconds, and then reconnect it (turn on the ignition).
4.Erase crash- OK
5.Write Flash- OK
Disconnect the 12V power supply of P004 adapter (turn off the ignition) and wait for 30 seconds, and then reconnect it (turn on the ignition).
6.Erase DTC-OK
7.Read ECU info- OK
The crash recorded is NO.
8.Read DTC- OK
The crash fault has been cleared.
Besides Toyota 89170 60460 and 0E080, OBDSTAR P50 airbag reset tool also supports much more ECU part No, check OBDSTAR P50 Airbag Reset Tool Coverage List.
