OBDSTAR X300 Classic G3 programmed proximity keys and did all keys lost to Geely Geometry E via OBD perfectly. 32 bit code is required from third-party platforms by VIN code.
Case:
There are two Geely Geometry E keys, one is working, and the other (black) is not working.
Operation:
Use X300 Classic G3 key programmer to program new key and do all keys lost
Connect G3 to the Geely vehicle via the main cable
Select IMMO>> GEELY/MAPLE/ENGLON V41.00>> Manual Select Model>> EMGRAND (PROTON)>> GEOMETRY E>> PROXIMITY
1.Program Keys
Input the 32-digits ESK code correctly from the 3rd- party
Confirm to delete the old key
Leave the key to be programmed in the car, follow the prompt to select key numbers
We select No for two
Program keys successfully
Test the two keys, both work well.
2.Do all keys lost
Select [All Keys Lost]
And perform the same operation as program keys
When select [Yes] to learn one key, program failed.
When select [No] to learn two keys, and put two keys in the car, program successfully.
OBDSTAR X300 Classic G3 A1+A2 Android 11 Key Programmer:
https://www.eobdtool.co.uk/wholesale/obdstar-x300-classic-g3-key-programmer.html
OBDSTAR X300 Classic G3 Key Programmer with Full License (Cluster Calibration ECU Clone Airbag Reset Test Platform) with MOTO IMMO Cable Kit+ Key SIM:
https://www.eobdtool.co.uk/wholesale/obdstar-x300-g3-full-version.html