Issue: All original 47proximity keys of HONDA 2020 AVANCIER are lost
Solution: Program new keys by doing AKL with OBDSTAR X300 DP Plus via OBD
Advantage: No need to change a new IMMO box! Save a lot of time and money!
Preparation:
OBDSTAR X300 DP Plus (same as Key Master DP Plus)
Main cable
Two blank keys to be programmed
The key adding function is available by connecting the server. Ensure the internet connection is normal during operation.
Operation:
Connect X300 DP Plus to the vehicle via main cable
The IMMO indicator is on
Then operate on the tablet
Select Car IMMO>> Honda/ACURA>> HONDA/ACURA latest software version>> HONDA>> Manual Select Model>> Asia>> AVANCIER>> PROXIMITY>> BUTTON>> Type (2019- ) (depending on the car type)
Double- click start button
- Ignition is still off, click Esc.
- Ignition is on, click Enter
Press and hold the start button till the ignition is on
Then select SMART KEY>> All smart keys lost
Read the programming conditions and notes on the screen carefully:
Programming conditions:
- No fault codes
- Make sure you have all proximity keys to be programmed
Programming notes:
- Make sure the following matters, in order to minimize the noise source when programming the proximity key.
- Turn off the switch, such as a navigation system and audio.
- Keep the proximity key and the diagnostic tool separated by approximately 1 m (3 feet)
- Close all windows, sunroofs and doors
The function will erase all keys, click ENTER to continue
Turn off the ignition (Press the engine start/stop button, be careful not to depress the brake)
Wait for the ECU to stabilize
Place an original proximity key in the vehicle, and remove all the proximity keys in the vehicle
Double click start button again till the ignition is switched on
Press and hold the start button
The ignition is turned on, release the engine start/stop button
It is a new model, click Enter
Enter the register smart keys number you need
Here input 2
Confirm the value
Take out all the register proximity keys from the vehicle (make sure they are two meters away from the vehicle)
Then only take one smart key into the vehicle within 100 seconds
Turn off the ignition
Take the proximity key to be programmed out of the vehicle
Place the first programmed key back into the vehicle
Turn on the ignition
Take the first key just registered two meters away from the vehicle, then take into the second key to be programmed
The smart key has properly been registered
Turn off the ignition, then turn on
Now the IMMO indicator is off
Click Enter to continue
Turn off the ignition…then turn on
Registration has been completed
Turn off the ignition…on
Now the all smart keys lost process is done
Click key quantity to see the current key number
It shows 2 keys registered in the ECM/PCM
Finally, test the two keys and work well
Alright, HONDA 2020 AVANCIER 47 proximity keys AKL have been programmed by OBDSTAR X300 DP Plus key programmer successfully.
