Question: I need a tool to read IMMO data and add key to my VW MQB RH850 cluster, does Autel and Launch support? Which tool is recommended? Here is the suggestion of EOBDTOOL.co.uk engineer: Autel IM608 Pro/ IM608 PRO II… Continue Reading
OBDSTAR X300 Classic G3 Key Programmer with ECU TCU Cloning Function License can perform the same function (Car/Motorcycle ECU+ TCM+ Body/Other clone) as OBDSTAR DC706 ECU Tool Full Version. Now both support checksum correction function as well. It was released by OBDSTAR on August 6th,… Continue Reading
Here are some good tools that support VW MQB RH850/V850 dashboard key programming or mileage correction. No need to cut wires or lift pins! 1.Yanhua ACDP2 with ACDP Module 34 Function: 1. Support IMMO and mileage correction for the… Continue Reading
Lonsdor K518 PRO/K518 series key programmers released a new upgrade for Nissan Auto Immobilizer on August 2nd, 2024. It makes key programming easier and faster. Check the update info below and update your K518 device ASAP. New Nissan models supported:… Continue Reading
It has been tested and confirmed that OBDSTAR X300 Classic G3 Key Programmer can read PinCode and do all keys lost programming for HAVAL H63ND via OBD perfectly. Procedure: Connect the OBDSTAR G3 and the vehicle via the OBD… Continue Reading
Most Launch X431 tools support 2 years free update, some support 1 year free update, and a few support free update for lifetime. How to check when your device subscription will expire? If expires, how to update the software subscription?… Continue Reading
OBDSTAR DC706 with ECM V30.96 can read and write Volkswagen SIEMENS SIMOS 3.3A 29F400BB+93C76 ECM EXT EEPROM (95320) EXT EEPROM and Flash data, Pincode and IMMO OFF in Bench mode perfectly. OBDSTAR P004 Adapter & ECU Clone Jumper, main cable… Continue Reading
Lonsdor released a new Lonsdor KH100+ Hand-Held Key Programmer. It’s blue, and newly added four remote keys and Indian cars TATA and Mahindra than the old Lonsdor KH100+ (grey). Except that, they support the same functions. Advanced functions: Identify copy Chip simulation Remote generation… Continue Reading
Customer problem: I wanted to use X431 PAD7 to convert miles to kilometers, Fahrenheit to degrees Celsius, etc on my Volvo V70 2006. I selected km and the F1 button, and the loading window started, but the window disappeared and… Continue Reading
Yanhua Tech newly released Yanhua ACDP Module 34 to work with Mini ACDP-1 and ACDP-2 to add new key, do all keys lost and correct mileage on VW MQB RH850 IMMO. No soldering, No need to pry up the chip pins, No capacitor removal.… Continue Reading
Alientech KESS V3 ECU Programmer with the advanced DynoDrive function allows customers to calculate and verify while driving a vehicle. The DynoDrive feature can be activated by all users with the KESS3 Master Version and Slave Version and does NOT… Continue Reading
