Here is a simple way to read Bosch MED17.8.10 ECU data on bench using Xhorse Multi-Prog and GODIAG guidebook. Preparation: Xhorse Multi-Prog ECU Programmer GODIAG Xhorse MultiProg Mastering Programming Book GODIAG ECU GPT Boot AD BOSCH MED17.8.10 ECU Windows PC Procedure: Open Multi… Continue Reading
OBDSTAR X300 Classic G3/DC706, Xhorse Multi-Prog, Flex, and Autotuner are capable of reading and writing data for Toyota Generation 3 (R7F701216) Denso ECUs, but they operate through different methods (Bench or OBD) and require specific hardware setups. Check the comparison details below. … Continue Reading
Question: I tried using Xhorse Multi–Prog to read the Renault Continental ECU SID309, but it failed. The error message displayed was: “PFLASH unprotection failed” and “Connection failed”. Solution: Currently, Multi Prog does not support this ECU model. The Renault SID307, SID309, and SID310… Continue Reading
Is it possible to use Xhorse Multi-Prog to read and write VW MQB48/MQB49/5C dashboards? Yes! Xhorse XDNPR8GL MQB-RH850/V850 Adapter is newly released to work with Multi Prog to perform this function. No need to cut wire or lift pin! Easy reading,… Continue Reading
Here are some good ECU Programmers that support CONTINENTAL SID310 reading and writing: Xhorse Multi Prog, CG FC200, Alientech Kess3, Hexprog II. 1.Xhorse Multi-prog(Boot mode) Price: €755 (EU/UK Ship No Tax free shipping) Support Dacia, Renault, Opel, and Nissan SID310… Continue Reading
Xhorse Multi-Prog and CG FC200 are the best original ECU/TCU programmers under 1000 Euros. Both can read and write a wide range of ECUs, and also can read VAG MQB48 NEC35XX IMMO data and correct mileage, etc. What is the difference between them?… Continue Reading
Xhorse Multi–Prog feedback: VAG Bosch EDC16U34 ECU Immo OFF, checksum, read and write OK in bench mode Whole process takes about 2 mins. Connect Multi Prog Programmer and EDC16U34 ECU via ECU adapter, and connect to PC via USB cable Select… Continue Reading
Was Xhorse VVDI Prog discontinued? Which function and car model is supported by Xhorse Multi-Prog Programmer? Check the answers below. Q: Xhorse Multi- Prog and VVDI Prog, what’s the difference? A: Multi-Prog covers all functions of VVDI Prog. The main… Continue Reading
Xhorse Multi-Prog is the second generation of VVDI Prog programmer. It’s a powerful Pro-level ECU programmer that has built-in update software, supports self-test and smart operation mode, and is able to read BMW ISN and clone various brands of ECUs,… Continue Reading
