KT200/KTM200 ECU Programmer software Common problems and solutions 1.The software cannot connect to the server After the normal connection, click “CONNECT”, the “WAIT INTERNET CONNECTION” buffer will pop up, and it has not been connected, and finally the page will… Continue Reading
Topic: Which device can read and write BMW MSV90? Eobdtool.co.uk engineer’s suggestion: KT200, CGDI BMW, FC200/AT200, Yanhua ACDP with module 27 1.KT200/KTM200 (in boot mode): KT200 ECU List Read and write MSV90 DME in KT200 software: Open… Continue Reading
Issue: All original 47proximity keys of HONDA 2020 AVANCIER are lost Solution: Program new keys by doing AKL with OBDSTAR X300 DP Plus via OBD Advantage: No need to change a new IMMO box! Save a lot of time and… Continue Reading
Eobdtool.co.uk engineer tested and confirmed that VW MPC555/6-VAG EDC16U1 EEPROM can be read and written by KT200/KTM200 ECU programmer in Bench mode without any issue. This is VW MPC555/6-VAG Bosch EDC16U1 ECU module. Before the operation, connect KT200 ECU… Continue Reading
Autel MaxiBAS BT608E is the upgraded version of Autel BT508/BT506. It’s an accurate battery diagnosis and professional analysis tool for testing 6- and 12-volt Batteries from 100-3000 CCA. It covers Flooded, AGM, AGM Spiral, EFB and GEL Cell batteries, and… Continue Reading
Here eobdtool.co.uk shares the solution to resolve V2022.09 MB SD C4 Xentry Software WIS/ASRA/MSS disappearing problem for MB SD C4 and Super MB Pro M6 diagnostic tool. Problem: If you run Benz WIS software after activation and there are… Continue Reading
2022.09 MB SDconnect C4 software (XENTRY/DAS) is verified to work with the MD SD C4 Plus and Super MB Pro M6 series diagnostic tool without issues. Mercedes-Benz software V09.2022: Special function version Support operating system: Win10 Pro x64 … Continue Reading
Customer problem: I use my GM MDI 2 with HDD software on Lenovo X201 laptop which supports Win7 64bit and 4gb ra. It can work normally for the first time, but after the computer is shut down and then started,… Continue Reading
Yanhua ACDP Module 28 is specially designed for Jaguar, Land Rover, Chrysler, Dodge, Fiat, Honda, Jeep and other models of the ZF-9HP gearbox clone in BOOT mode. Compared to the traditional cable connection, it’s simpler, safer, more efficient and reliable.… Continue Reading
Here is a new test about using Autel MaxiIM IM508 to add smart remote for Subaru XV GT Edition 2021 via OBD, no need online subscription. The original Subaru chip is 8A RF430 433.92 MHZ FSK Turn ignition on… Continue Reading
Some guys encounter this problem:After getting ecu bench tool and installing the application, registration is complete. I had try it right away on edc16u34 and it won’t read ID. always says S1 and S2 pinout error. Solution: Make sure the… Continue Reading
