Super ICOM Pro N3+ can use the J2534 protocol to read through after switching with one key.
It works well with ODIS V11 software to diagnose Volkswagen vehicles with J2534 interface.
No need to open J2534/DOIP function authorization!
Vehicle: i.e. 2007 Volkswagen Passat Sedan BSF 1.6L Simos/75Kw
Device: Super ICOM Pro N3+ BMW diagnostic tool
Download and install ODIS V11 (Password: 8888)
Download and install N3+ J2534 driver
Connect N3+ to computer with USB cable, and connect to the vehicle via OBD cable
Long press N3+ switch button for 3s, wait until USB and WiFi indicators on the main unit flash.
RunJ2534 software, and select VCI type as mongoose vci.
Software is ready to use.
Open VAG ODIS software
When it appears “Do you want to open or save this file”, just click “Cancel”.
Click “Diagnosis” function to identify the VIN automatically
Tick the option “work with Guided Fault Finding”
Click “Starting Diagnosis”
Vehicle identification is in automatic mode, so just select the related vehicle version and motor
Then click “Accept”
If there is no orders found, click “No RO”.
Click “Continue” to start the diagnostic entry.
Click the vehicle icon on the toolbar at the top
The DTCs are identified by Super ICOM Pro N3+ BMW diagnostic tool and ODIS V11 successfully.