How to cut Mercedes-Benz HU64-2.M10 by 2M2 Magic Tank automatic key cutting machine? Check the step-by-step guide below.
Video:
Procedure:
Step 1: Decode Benz HU64-2.M10 key
Insert the original HU64 key into cylinder to test OK
Connect adapter to 2M2 Magic Tank and power on
Open Tank APP on Android phone and turn on Bluetooth
Press the edit key icon in the left bottom corner
Input “HU64” in the search filed
Select “HU64-2.M10” and then press “Decode”
Follow the prompt to decode HU64-2.M10
1.Insert the original key and use an HU64 clamp to fix, then tighten the screws
2.Set the HU64 clamp to the bottom of the clamp in the right side and clamp it
3.Attention! The HU64 clamp must be against the side as picture
Then click on “Confirm” to decode
Step 2: Cut a new key
Remove the original key and click “Confirm”
Follow the prompt same as step 1 to put the new cutter
Cutting key…
When finish cutting side A, please clean up and cut side B
2M2 Magic Tank cut all sides of the new key success
Insert the cutter into cylinder, works normally!
In addition, 2M2 Magic Tank has been confirmed that it can cut FIAT/ ALFA ROMEO GT15, Opel/ Chevrolet HU100, Ford/ Land Rover HU101, HON66 (All keys lost), VW HU66, Hyundai/ Kia KIA7 successfully.
http://blog.eobdtool.co.uk/2m2-magic-tank-test-reports/
Hope it helps you!