Learn how to extract the Nissan 28-digit PIN code from HFM module for key programming using KEYDIY KD-X4 key programmer and MINI Prog cable.
Supported Nissan Models:
- Nissan SYLPHY / SENTRA B18
- Nissan X-TRAIL / ROGUE T33
- Nissan PATHFINDER (2021+)
- Nissan QASHQAI (2021+)
- Nissan NOTE e-POWER
- Nissan NP300 (2019+)
- Nissan JUKE (2020+)
- Nissan RS3
Work Steps:
Example: Nissan X-TRAIL T33 all keys lost programming
Step 1: Hardware Setup
1.Remove the HFM module from the target vehicle.
2.Locate the solder points using the provided wiring diagram.
3.Solder the MINI Prog cable wires directly to the HFM module PCB, then plug the connector into KD-X4 programmer.
Step 2: Data Extraction
1.Execute the read command on KD-X4 to pull the raw memory dump from the HFM module.
2.Save the reading file to your device.
Step 3: PIN Calculation & Key Programming
1.Navigate to: NISSAN -> Select by type -> Smart key system -> T33 -> 2021- (00.10.01.00).
2.Import the saved IMMO data to calculate the 28-digit PIN code. This password can be used for key matching when all car keys are lost.
3.Generate the remote file onto a KEYDIY KD ZB03 Universal Smart Key.
4.Complete the key match process through the diagnostic interface and test the start/remote functions.
