A 2021 Chevrolet Onix arrived for a spare key programming job with multiple keys already stored in the system. Using the KEYDIY KD-X4, the new key was added successfully via CAN FD communication, and the entire procedure was completed without requiring a security PIN. Fast, straightforward, and completed through OBD.
Generate the KD Key
- Place the original key on the KD-X4 induction coil and identify the transponder chip.
- Check the remote frequency. The original key in this vehicle is 433 MHz.
- Go to: Remote Function → Vehicle Remote → CHEVROLET Onix (2019+) Folding ID4A → Generate → Wireless Generation
After generation is completed, return to the main menu.
Enter Immobilizer Programming
- Connect the KD-X4 to the vehicle and enter:
- Immo Programming → CHEVROLET → Select by Vehicle → South America → Onix → 2020-2023 → Mechanical Key CANFD → TYPE 9 (CAN FD) → Start Execution
- Read the number of registered keys. This vehicle shows 3 keys stored.
- Select Add Keys (Without Password)to continue with password-free key learning.
Learn the New Key
- Turn the ignition ON and start the learning procedure.
- The system reads the VIN and automatically retrieves the vehicle password. Confirm and continue.
- Wait for the 12-minute security countdown.
- When prompted, switch the ignition OFF, remove the original key, insert the generated KD key, then turn it back ON and hold for 5 seconds.
The hazard lights flash once the key has been successfully learned.
Check the Result
- Read the registered key count again and confirm the new key has been added.
- Follow the final ignition prompt to complete the procedure.
- Test the newly added KD key.
Verification
The vehicle starts normally and the remote functions operate correctly.
Workshop Notes
This Chevrolet Onix is equipped with CAN FD communication protocol. The KEYDIY KD-X4 Key Programmer performs the programming directly via the OBD port, allowing the job to be completed smoothly without the need for an additional CAN FD adapter.
