This article explains how to use Autel IM608 to read the CS and Pincode of Audi A3. The following is the preparation before reading.
Items:
Autel IM608 Key Programmer
AAC001 cable
Engine modle：MED17
J2534 Reprogrammer
Procedure:
1. Click IMMO and then Accept the agreement.
2. Select vehicle model( This video car model is Audi)->Expert Mode->Engine->MED17->Read IMMO data using Direct Method.
3. When the indicator light under the trolley mark flashes, it means Reading and Calculating IMMO data…..
4. Read successfully.
As can be seen from the above reading results, Autel MaxiIM IM608 can not only read CScode and Pincode but also read out the ECU hardware and software models suitable for the car model. This kind of key programmer can be said to be very powerful.
In addition, before this video, BCS Xhorse remote failed, then we used aftermarket remote and complete key programming
Learn more about the IM608 address:
https://www.eobdtool.co.uk/wholesale/autel-maxiim-im608.html
More about Autel IM608:
http://blog.eobdtool.co.uk/autel-im608-add-new-smart-key-to-2013-ford-fusion/
