X300 M User Manual Download: http://www.eobdtool.co.uk/upload/pro/sm52-obdstar-x300m-user-manual.pdf This handbook is the manual of X300 M. Without the written permission from the manufacturer, any company or individual shall not copy or backup it in any form (electronic, mechanical, photocopying, recording or otherwise).… Continue Reading
Xhorse VVDI RKE BOX is tested working fine to program remote key for New Alto. Working together with VVDI2 and mini remote programmer, Xhorse VVDI RKE BOX is able to change the original straight key to folding key. How they… Continue Reading
Xhorse VVDI RKE BOX is successfully tested ok to program remote key on Kia K3. Working together with VVDI2 and mini remote programmer, Xhorse VVDI RKE BOX is able to change the original straight key to folding key. How they… Continue Reading
Xhorse VVDI RKE BOX is successfully tested ok to program remote key on Honda CRV. Working together with VVDI2 and mini remote programmer, Xhorse VVDI RKE BOX is able to change the original straight key to folding remote key. How… Continue Reading
Q: Can OBDSTAR F100 do key programmer for Mustand 2015 A: yes Q: Can F-100 key programmer do odometer correction for the vehicle models followed: Ford F-150 EcoBoost 2015 Ford Focus 2016 Mazda CX5 2016… Continue Reading
Set Ford Focus 05 as an example, you will see how I Programm a new Key with Magic Wand 4C 4D Transponder Chip Generator and OBDStar F100. Step 1: Use Quickly Code Reader to test the original transponder key. First… Continue Reading
This post starts with the issue that Mercedes Benz S-class S600 2007 crank and no start. Then according to days’ test and the guide of an experienced technician, finally fixed the problem. Car model and year: Mercedes Benz S600 2007… Continue Reading
Handy baby V6.1.0 Update Video: Handy Baby Hand-held Car Key Copy Key Programmer for 4D/46/48 Chips is specially for 4D/46/48 chips copy. Handy Baby is a hand-held key tool, easy for operation, replacement for 468 KEY PRO III.
News for you! We tested XPROG-M V5.6.0 is operating fine to read write ECU data, and only takes 3 steps to install. So how to install XPROG-M V5.6.0? There are several main steps. Install Adobe Reader Registry editor Install device driver… Continue Reading
XTOOL EEPROM adapter is a kind of hardware developed for car models which chips must be taken apart to read anti-theft code. Users are allowed to take apart chips by themselves from those control units, like vehicle anti-theft box or… Continue Reading
Chapter 2: How to update software for OBDStar X300 Pro3 2.1 Update Tool software installation Download the update tool and diagnostic software on www.obdstar.com, double click , then go to the next step: Step 1：Click “Next” Step 2: Click “Next… Continue Reading
