New arrival KTMflash ECU is a tool which could read-write ECU data, read transmission data etc. It could read Infineon and gearbox transmission ECU. KTMOBD ECU Programmer is now available in eobdtool as well. It could read chip data, read… Continue Reading
It's real crack Ksuite 2.47 ECU programmer with added 7400 Vehicles is tested working great on Kess V2 5.017 clone without activation, and free to update and download on eobdtool.co.uk. Continue Reading
The following image is KTM FLASH and Transmission Power Upgrade Tool. KTMflash can read the chip data, change the computer, read transmission data etc at a fast speed. Guide on How to use KTM FlASH ECU programmer Switch board:… Continue Reading
Kess 5.017 With NEW K-Suite 2.47 with exactly 7400 Vehicles added. Test reports: Tested on Polo 2011 tdi with PCR 2.1 unlock by obd. unlocking of PCR2.1 eeprom work all by obd like cmd..activate boot..read..unlock..write mod.yob done. Continue Reading
Here you go for the pinout of orange 5 read NEC uPD70F3624. this pinout orange If you are looking for Orange 5 (OEM) at cheap price, you can go to here: http://www.eobdtool.co.uk/wholesale/oem-orange5-programmer.html Full package
Guide: In xprog choose atmega64 >>> PROJECT >> FILES, and load FLASH, EEPROM and CONFIGURATION files >> Firts ERASE DEVICE… after >> WRITE and all be ok…” Xprog M 5.5.5 flash files free download: Continue Reading
2018 Xprog M V5.84 firmware V4.4, with USB dongle, adds new authorizations: AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9. XPROG-M V5.84 Adapters + package list: 19pcs x Adapters Set: ADP-0001 TMS370 PLCC28 programming adapter ADP-0002 TMS370… Continue Reading
The Kess reset after internet update “repair” solution depend of the serial number. Have Kess, accidental internet connection after which you get the following info when in ksuite: Serial number: K10033818 Customer Code: blank or C5555 Grup Code: blank… Continue Reading
As usual, Kess V2 5.017 Online Green PCB will pass the QC test before it arrives to the users. Let's have a look at the real pictures took in the QC room. 1.Open the box, today the QC guys… Continue Reading
I did all the tutorials regarding the flashing of the carprog. I tried the method that I posted to you. It is functional, I just simplified and modify the flashing procedure for that it is simple for the novices (I… Continue Reading
Open the Kess V2 Ksuite software after installation with the error “EXTERNAL EXCEPTION EEFFACE”. Reasons that may cause the error: 1 the driver is not installed well 2 the device is not connected 3 the operation system is not supported… Continue Reading
