Change Opel unlock settings with OPCOM Op-com 2010V OBD

Opel Corsa C is able to change how car unlocks. The features can be activated with OPCOM China clone 2010 firmware 1.59 in order to have all doors open at the same time on the first press on the unlock button.
Tool needed:
OP COM China clone 2010 firmware 1.59 diagnostic cable
A laptop running Win XP mode
For Opel newer models, like Vectra-C, Astra-H, you should choose OPCOM 2009V with firmware version V1.39.
Well install OPCOM 2010 software
Connect OPCOM interface with vehicle via DLC
Turn vehicle ignition ON
Run software
Select Diagnostic
Select vehicle year
Select vehicle model: Corsa C
Select control unit: Body
Select control module: BCM
The opcom software will detect vehicle information
Select Programmingbutton on the right
Select Variant Configuration
Select and locate doors Unlocking Function
Change the Dr Door firststatus to Allat once
Click Program
After the windows display program finish notice, back and exit the op-com software
Disconnect OPCOM cable
Turn ignition OFF


Press down the unlock button on the fob, all doors will unlock at this time 

New arrive! OBDSTAR H111 is a new Opel Key Programmer & Cluster Calibration which supports more than 90% Opel models in the market, click to know more if you are interested: