This post comes with the user guide of ECUHelp HTProg. You will learn what this product is, and how to use it (download+ install+ activate).
What is ECUHelp HTProg?
HTprog is a comprehensive tool. It can be used to perform chip tuning, ECU clone, BDM read / write, Flash data edit, key reset, and BMW ISN read, etc.
There are three configurations for selection.
Option 1: ECUHELP HTprog Full Version (Adapter +Cables + Dongle)
Works alone! No need to work with ECUHELP KT200
Package Includes:
1pc x MPC Module
1pc x EEPROM module
1pc x +12V Power Supply
1pc x BDM adapter
1pc x Tricore adapter
1pc x USB
1pc x Software Dongle
Option 2: HTprog Adapter and Cables for KT200
Works with ECUHELP KT200, not work alone.
Adds more ECUS and TCUS protocols, strengthens the cloning function, and supports more protocol cloning, also read and write car body modules, and refresh keys.
Package Includes:
1pc x MPC Module
1pc x EEPROM module
1pc x +12V Power Supply
1pc x BDM adapter
1pc x Tricore adapter
1pc x USB
Option 3: HTprog Clone Adapter for ECUHELP KT200
Works together with ECUHELP KT200, not work alone.
Can perform Chip tuning / ECU Cloning, on bench programmer, EEPROM programmer, and key function etc.
Package Includes:
1pc x KT200 clone adapter
1pc x MPC module
1pc x TriCore cable
1pc x USB cable
ECUHelp HTProg detailed functions instruction:
- Chip Tuning / ECU Cloning:
With HTprog you can read and write P-Flash, D-Flash, External Flash and external EEPROM with the option of automatically checksum correction, you will have many methods in most of ECUs:
1.Factory mode (On Bench for most of ECU/TCU): with this option you don’t have to open the ECU cover. Just plug some wires for power and signals and you are ready to go.
2.Tricore Boot Mode for all Tricore ECU: Opening the ECU is mandatory to connect the boot wire on the ECU board. This method is useful when the ECU is not responding.
3.BDM (Background debug mode)
4.JTAG for Renesas and Freescale
- BDM Read / Write:
With HTprog you are able to break the protection of immobilizers like CAS in BMW, EIZ/EIS in Mercedes Benz, BCM in Volkswagen and Porsche, etc.
- Built in Editors:
With HTprog you can edit many Flash data like:
Edit CAS3+ VIN, ISN and keys
Edit CAS4, CAS4+ VIN, and ISN
Edit mileage for BMW instrument clusters
- Other functions:
You can do key reset for many brands like Audi, BMW, MINI, Porsche, Toyota, Fiat, Renault, etc.
Read/Write a wide range of SOP8 EEPROMs
Works side by side with Autohex to make keys
- Key Features:
Master version. One License for all protocols on bench.
Supports one of the largest ECU/TCU list in Cars and Trucks for ECU cloning and Chip Tuning
Supports both old and latest ECU / TCUs from Bosch, Continental, Delphi, Marelli, Denso, Tenic, RW and Valeo, etc
Reads all BMW long ISN from BMW DME and DDE including MD1 and MG in F/G series
- IMMO BDM Read/Write:
With HTprog you are able to break the protection of immobilizers like CAS in BMW, EIZ / EIS in Mercedes Benz.BCM in Volkswagen and Porsche, etc.
How to download ECUHelp HTProg software?
Just free download HTProg software by the following mega link.
https://mega.nz/file/8rJxhB5J#g1jnHe9yBfho7N1Y_0KiZyBM71HwuM6-gyhN4BsW_zg
Software version: 1.0.45
Size: 65.2 MB, no password
Compatible operating systems:
* Windows 7
* Windows 8/8.1
* Windows 10
* Windows 11!
Minimum recommended requirements:
CPU > 2.5 GHz (Intel i5, i7)
RAM > 8GB
NOTE:
1.It is advised to uninstall any antivirus software and disable the firewall before using the ECUHELP HTprog.
2.It is important not to upgrade the software to avoid any potential damage to the hardware.
3.Activation of the HTprog is necessary and should be done using the user’s registered email address.
How to Activate HTProg Software?
After downloading, follow the on- screen prompts to install software.
Connect HTprog Clone Adapter to KT200 device, and then connect to the computer
Run HTprog software, it will prompt you to enter your email address.
Enter your email address and wait for the activation link to be sent to you.
Once the HTprog Clone Adapter is activated for KT200, it is ready to use.
HTprog On Bench Programmer Support List.pdf (150K)
HTprog ECU Clone Support List.pdf (1.4M)
