This article aims to show how to download, install, register and activate FoxFlash ECU Chip Tuning Tool software for customers who are the first time to use it.
Compatible operating systems:
Recommended minimum requirements:
CPU > 2.5 GHz (Intel i5, i7)
RAM > 4GB
Maximum number of computers available:
Up to 6
Italian, English, Dutch, French, Spanish, Polish, Portuguese, Czech, Romanian, Turkish
Step 1: Download Foxflash software
Connect foxFlash ECU programmer to laptop/PC with the USB cable
Make sure the laptop or PC connect to internet as well
Go to www.dfb-technology.com website
Click Download, and click foxFlash Manager tool
Enter your available email and phone number
Click Download to start downloading software
Step 2: Install Foxflash software
After download, double click FoxflashManagerSetup.msi and run it to install easily
*The setup requires the .NET Framework version v4.7.2 above. If you don’t have installed, click Yes to obtain it from the web. Close the anti-virus software. Otherwise, you cannot install the software.
After installation, foxFlash software needs to register and activate before using.
Step 3: Register Foxflash software
1.Run FoxFlash Manager program on the desktop
2.It will ask you to register the first time to use it. Just click Yes to continue.
3.Input your available email and click Submit
Then you will get the message ‘User successfully created. Please contact vendor to activate.’
Step 4: Activate Foxflash software
1.Check the SN on the backside of your foxFlash box (the code= SN)
*Don’t spread the SN to anyone. It’s a safe code for you. Don’t let any third party or guys know that code or it will let your tool be locked.
2.Enter the SN code correctly to activate foxFlash software
*Make sure the SN code input is correct. If you input a wrong code, you will get the error prompt ‘activation failed. Enter code provided by your vendor. Try again.’
Step 5: Install FoxFlash software driver
Open foxFlash Manager application
After the download is finished, go to open the folder C:\Program Files(x86)\FoxFlash
Install the driver
Disconnect your foxflash tool, and then plug in the USB again
Click the Active button on foxFlash Manager APP, and wait until the activation process is done. The ‘Active’ status will become ‘Activated’.
Run the foxFlash App on your desktop, then log in with the password (SN code) on the window
Now FoxFlash software is ready to use online.
If you want to close the software, first click the Close button on foxFlash Manager app, and then click the foxflash exit button.
Always run foxflash manager app each time when you need to use foxflash ECU programmer.
Run it and then click the Active button, it will keep the tool access to our server.
It needs to click Download if you don’t have the software the first time using.