Customer problem:
Hello! I have a problem with the Xhorse Dolphin XP007. It does not glide ok from back to forward. It moves in circle. How to fix this issue?
For this problem, eobtool.co.uk engineer gives the solution below.
Step 1: Turn over the dolphin xp007 key cutting machine and check whether there are foreign objects in the sliding clearance of the bottom guide rail.
- If there are foreign objects, remove them.
- If there is no foreign body, please follow the second method to check.
Step 2: Adjust the two set screws on the right side against the guide rail, move the cross slide back and forth, if the cross slide smooth without stuck, immediately tighten the 8 screws.
*If 8 screws on XP007 are loose, do not tighten 8 screws immediately. Adjust the two set screws on the right to ensure the smooth movement of the cross slide before tightening the eight screws.
