Launch officially released the new X-431 ECU Clone software V10.75 on September 21, 2026.
This update enables locked BMW/VW Bosch MG1/MD1, RH850 chip reading (Bench/Boot mode), Fiat MB91 IMMO parsing, and Continental SIMOS18.x BOOT cloning, etc features for X431 X-Prog5, X431 ECU & TCU Programmer, and X431 X-Prog3 with PC Adapter.
What You Get with Launch G5
If you use X-PROG5 programmer, V10.75 unlocks several hardware-specific features:
- RH850 Chip Reading:Read immobilizer data on Renault, Nissan, Jeep, and Ford cars using RH850 chips (such as R7F7010193, R7F7010253, R7F7010563, R7F7010566).
- GM BCM Service:Read and write RH850 chips inside GM body modules.
- Locked VW ECUs:Read and write locked VW MG1CS031 H80 and MG1CS111 H80 (TC298) in BOOT mode.
- Locked MD1CS089:Read and write locked MD1CS089 (TC299) in BOOT mode.
What You Get on All Supported Launch Tools
Whether you use X-431 X-Prog5, X-431 ECU Programmer, or X-PROG3 PC Adaptor, you get these features:
- BMW BENCH Mode:Read and write 6 locked BMW ECUs (MD1CS001, MD1CS201, MD1CP032, MG1CS003, MG1CS024, and MG1CS049 with TC298 chips) without opening the cover.
- x Cloning:BOOT mode read, write, and full clone support for SIMOS18.2, SIMOS18.3, SIMOS18.6, and SIMOS18.7 ECUs.
- Fiat & Marelli Support:Parse Fiat MB91 IMMO data; reset and replace VIN for Magneti Marelli 7GF; reset and parse anti-theft data for 4GV and ME7.5.30 modules; change 7GF VIN numbers.
- Fixes & Transfers:Repair EDC17C69 ECU data, read and write access data for CPGDSH2.26.X TCM/ECM modules in BENCH mode
How to Update
Update directly in your Launch PC software or grab the update package from (https://en.cnlaunch.com/download/).
