Following are the most frequently asked questions of FgTech Galletto V54 ECU tuning kit Master version. About software: Q: I have got my package, but the CD is broken, where and how can i get the software? A: Sorry, you need to… Continue Reading
FGTech V54 Galletto 4 Master has released to the latest version V54. According to the users’ feedback, many of them have some difficulty in installing the software. Here list the installation guide from obdtool service. Step 1 Insert Galletto 4 V54 CD in… Continue Reading
This message is to Every one that have a FGtech Galletto. Or want to Buy a new one: I have inspecting the FGtech Galletto V53 and the Galletto V54, and after a long time, for my Surprise, I reached a… Continue Reading
I have tested some other models: EDC16U1 (VAG) Read/Write ok (OBD) EDC15V (VAG) Read/Write ok (OBD) Audi A6 (TRICORE BOOT) E70 3.0D EDC16 (BDM) Renault Delphi 2007 k-line I use FGtech V54 want to read and write SF10Fxx (K-Line) via Tircore Boot… Continue Reading
Following are the most frequently asked questions of FgTech Galletto V54 ECU tuning kit Master version. About software: Q: I have got my package, but the CD is broken, where and how can i get the software? A: Sorry, you… Continue Reading
Problem: When install FGTech Galletto 2, the FTReadWrite replied “Can’t find device” error message. When trying to uninstall the driver, the window screen warmed it is not FGTECH device, but USB-to-Serial device. If install the driver, fgtech software did not run and FTReadWrite or MProg didn’t find the ftdi chip. Try to install the driver on both win 7 and win xp computer over and over, but in vain. Solution: 1) Download and install the Virtual Com Port drivers from FTDI website: Virtual COM Port Drivers http://www.ftdichip.com/Drivers/VCP.htm 2) Then connect the FGTech to computer via USB port which had no device programmed and 1 blank device when the MProg Utility it shows. NOTE: If you had backup and reprogram with the ept file. The system will not recognize the FGTECH Galletto 2 and will not reprogram the firmware bin file. The Virtual Com Port Drivers would overlay the fgtech ECU programmer. Then you have to again download the related driver in FTDI website. CMD Uninstaller 1.4 http://www.ftdichip.com/Support/Utilities.htm 3) After install the right drivers, FTReadWrite programmed the backup firmware file, run FGTech software by referring to the user manual on obd365 webpage. www.eobdtool.co.uk here offers some FGTECH related files download.
