Handling the latest Toyota GEN3 (R7F701216) engine control modules requires a blend of technical precision and the right hardware. Fortunately, both OBDSTAR X300 Classic G3 and DC706 ECU Tool now offer comprehensive support for these units via Bench Mode. Whether you are… Continue Reading
This guide demonstrates the procedure for all keys lost programming on a Mercedes-Benz W169 EIS by bench using OBDSTAR X300 Classic G3 (Key Master G3). Ensure all connections are secure and follow each step carefully to avoid errors. Preparation: 12V… Continue Reading
Both OBDSTAR DC706 and X300 Classic G3 support Volkswagen MED17.1.27 ECM data reading and writing, mileage calibration, VIN writing, and IMMO off setting on Bench. This guide will demonstrate the operation using the DC706 ECU Tool. Preparation: VW MED17.1.27… Continue Reading
It has been tested and confirmed by OBDSTAR Tech that OBDSTAR DC706 ECU Tool has the ability to read and write VW SIMOS18.10 & SIMOS10.22 ECMs in Boot mode. It’s simple and fast to operate with the wiring diagram and instruction in the device system. Only… Continue Reading
