KTMOBD ECU programmer can read out the data of Audi OAW gearbox successfully. This is Audi OAW gearbox removed from the vehicle, you can see it is connected with KTMOBD ECU programmer. KTMOBD ECU programmer indicator light is… Continue Reading
Multiflasher Ecu programmer for Hyundai kia via OBD is a combination of one Tactrix Openport 2.0 plus one USB dongle plus (or the software is compatible with other J2534 device. Multiflasher can read ECU data, write ECU data and do calibration,… Continue Reading
Free download Kess v2/Ktag software Ksuite 2.23 and Winols 2.24: Here you have full ksuite, with help and internet protected Continue Reading
Program: Read a Magneti Marelli 8GMK from an Abarth 124 ECU programmer to choose: Kess V2 firmware 5.017 or Ktag firmware 7.020 Information: 500x with the same ecu is supported by Kess 5.017 (protocol 532), but 124 has a new… Continue Reading
We had received a review of BDM Connectors for Ktag 7.020 . Here is it: I have already received the shipment and I have time to test them without problems in Bosch EDC16U1 and in bosch EDC17c46. before using them I… Continue Reading
New arrival KTMflash ECU is a tool which could read-write ECU data, read transmission data etc. It could read Infineon and gearbox transmission ECU. KTMOBD ECU Programmer is now available in eobdtool as well. It could read chip data, read… Continue Reading
It's real crack Ksuite 2.47 ECU programmer with added 7400 Vehicles is tested working great on Kess V2 5.017 clone without activation, and free to update and download on eobdtool.co.uk. Continue Reading
The following image is KTM FLASH and Transmission Power Upgrade Tool. KTMflash can read the chip data, change the computer, read transmission data etc at a fast speed. Guide on How to use KTM FlASH ECU programmer Switch board:… Continue Reading
Kess 5.017 With NEW K-Suite 2.47 with exactly 7400 Vehicles added. Test reports: Tested on Polo 2011 tdi with PCR 2.1 unlock by obd. unlocking of PCR2.1 eeprom work all by obd like cmd..activate boot..read..unlock..write mod.yob done. Continue Reading
Here you go for the pinout of orange 5 read NEC uPD70F3624. this pinout orange If you are looking for Orange 5 (OEM) at cheap price, you can go to here: http://www.eobdtool.co.uk/wholesale/oem-orange5-programmer.html Full package
Guide: In xprog choose atmega64 >>> PROJECT >> FILES, and load FLASH, EEPROM and CONFIGURATION files >> Firts ERASE DEVICE… after >> WRITE and all be ok…” Xprog M 5.5.5 flash files free download: Continue Reading
