Pinout Iveco Daily Bosch MS6.3 ecu for Fgtech
Here pinout for Iveco Daily Bosch MS6.3 ecu that is not found in ktag. Obd not work, short circuit to ground (0.00V) The following picture helped me with Fgtech. Read/write ok. www.eobdtool.co.uk
Auto ECU Programmer
Ksuite 2.47 for clone Kess 5.017 Feedback Success & Fail list
Ksuite 2.47 for clone Kess 5.017 with red PCB Feedback: success list and failure list by obd. Ksuite 2.47 for clone Kess 5.017 success list: Opel Astra H 1,7cdti 2008 81kw denso ecu Read/write ok no problem Tested also on bosch me 7.1… Continue Reading
(Solved) Kess and Ktag error reading Magneti Marelli
Post starts with Kess and Ktag error reading Magneti Marelli description, then provide solutions. Symptom: Kess and Ktag error reading Magneti Marelli. I just bought KESS V2 V5.017 and Ktag K V7.020 Master Clone from a vendor recommended by a friend. Both are… Continue Reading
KTMOBD and KTMFLASH china clone, which one?
KTMflash mainly works on new Siemens & gearbox, it needs to desolder ECU when reading and writing. KTMOBD mainly read and write the Japanese ECU like Denso. 1. KTMflash test reports KTMflash ECU Software Install Guide and Read TC1797 Operation… Continue Reading
(Solved) MPPS v16 clone on Audi A3 2.0 FSI Bosch MED9.5.10 K-Line/CAN
MPPS v16 clone for Audi A3 2.0 FSI Bosch MED9.5.10 K-Line/CAN, I can ID the ecu but can't read, getting an error telling me to email the log file. Possible reasons: China clone mpps v16 will kill that ecu for… Continue Reading
How to install and use Multiflasher V3.15.1 to read write ECU?
Multiflasher V3.15.1 installation step by step and to read & write ECU data successfully. OS: XP, you can try on WIN7. Procedure: Install. Extract “Multiflasher 3.15” to the C:\ Go to C:\MultiFlasher 3.15_Current, send the “MultiFlasher” to the desktop. Install “GrdDrivers… Continue Reading
KTMOBD ECU Programmer Can Read Audi OAW Gearbox Data OK
KTMOBD ECU programmer can read out the data of Audi OAW gearbox successfully. This is Audi OAW gearbox removed from the vehicle, you can see it is connected with KTMOBD ECU programmer. KTMOBD ECU programmer indicator light is… Continue Reading
Multiflasher OBD ECU Programmer for Hyundai Kia Function List
Multiflasher Ecu programmer for Hyundai kia via OBD is a combination of one Tactrix Openport 2.0 plus one USB dongle plus (or the software is compatible with other J2534 device. Multiflasher can read ECU data, write ECU data and do calibration,… Continue Reading
Free Reworked Kess and KTag Ksuite 2.23 Winols 2.24 Download
Free download Kess v2/Ktag software Ksuite 2.23 and Winols 2.24: Here you have full ksuite, with help and internet protected Continue Reading
Choose Kess V2 5.017 or Ktag 7.020 to Read/Write Abarth 124Marelli 8GMK?
Program: Read a Magneti Marelli 8GMK from an Abarth 124 ECU programmer to choose: Kess V2 firmware 5.017 or Ktag firmware 7.020 Information: 500x with the same ecu is supported by Kess 5.017 (protocol 532), but 124 has a new… Continue Reading
BDM Adapter+ KTAG 2.23: Write EDC17C46Vw Yeti 2014
We had received a review of BDM Connectors for Ktag 7.020 . Here is it: I have already received the shipment and I have time to test them without problems in Bosch EDC16U1 and in bosch EDC17c46. before using them I… Continue Reading
