Use Lonsdor K518 Pro to do a 2015 Land Rover Discovery 4 AKL programming successfully.
Case:
There is one original key of Discovery 4, but other keys are lost.
AKL Programming procedure:
Connect the OBD2 test cable to K518 Pro key programmer and the vehicle’s OBD port
Select Immo& Remote>> Land Rover>> Select by vehicle>> Discovery 4>> Smart Key>> Smart Key AKL
The instruction shows at least two keys are required. In fact, using one key is also fine.
Click “OK”, and follow the prompt to turn off the ignition switch
Then it will display the part number and software version.
The key in the car has been identified as 0.
Confirm to program a new key
Take the smart key in the hand
Unlock the key once within 5 seconds
The key works if you hear a sound
Press it again within 5 seconds
The key in the car has been identified is 1 now
Confirm if program the next key, we just program one key, so select “No”
Key programming is completed
Finally, use the smart key programmed by K518 PRO to test the lock and unlock functions and start the car. All works fine!