It has been tested and confirmed that OBDSTAR X300 Classic G3 Key Programmer can read PinCode and do all keys lost programming for HAVAL H63ND via OBD perfectly.
Procedure:
Connect the OBDSTAR G3 and the vehicle via the OBD cable
Make sure the network connection is normal
Select IMMO>> GREATWALL/HAVAL/LINKTOU/ORA
Note: the car icon in the lower left corner with a lightning symbol indicated E-car.
Select GREATWALL/HAVAL/LINKTOU/ORA V42.27
Press Manual Select Model>> HAVAL>> H6 (3ND)
Step 1: Read Pincode
Select “READ PINCODE”
Turn off the ignition switch and turn on the dual flashing function
It takes about 5-10 minutes to execute, keep patience.
Read out the PINCODE
Step 2: Program all keys lost
Select “PROXIMITY”
Press the Start/Stop button
Select “All Keys Lost”
Prepare 8-bit security code and 32-bit SK code for this operation. Not ready for the situation that may cause the car to die!
Input the value
To start key learning, put the key in the induction area (cup) holder or sundries box) and learn key separately
The key learning is complete, and the number of programmed keys is 2.
Finally, test two programmed keys, both can start the car normally.
Alright! The all-keys-lost programming with pincode via OBD for HAVAL H6 Gen3 by X300 Classic G3 Key Programmer is successful.
