How to add new keys to VW 4. 5th MQB (3526+95320) by Yanhua Mini ACDP/ACDP2?
Yanhua Module 33 and PCF-KEY Adapter are required. Make sure the ACDP device is bound to Mini ACDP APP/software and ensure the network is smooth during the process.
Main steps:
Step 1: OBD identify
Step 2: Obtain IMMO data
Step 3: Make dealer key
Step 4: OBD learn key
Procedures:
Remove the instrument cluster from car
Open cluster shell and check the chip model
Power on ACDP/ACDP 2, and open Mini ACDP APP
Confirm the Yanhua ACDP device SN is showing on the upper right corner, it means ACDP is connected to your phone or PC
Select VW>> VW MQB IMMO>> 4. 5 TH (NEC+ 95320)>> IC Read Dashboard>> D70F3526 (A2C81589700) (A2C99606600) (based on chip model on the instrument panel)>> MQB74 Interface Board D70F3523/24/25/26+95320 (based on the chip model)
Click “Help” to check the connection diagram, and then use the Yanhua ACDP Module 33 Interface Board to connect Mini ACDP2/ACDP host and dashboard correctly as the diagram
Use the ACDP standard power adapter (voltage+12V, current>=2.5A)
Detect Pins are good
Continue to encrypt the chip
Read the chip model D70F3526 successfully
Save all backup data of the chip
Read and save the EEPROM data
Execution is completed
Reinstall the instrument panel into the vehicle and confirm that the vehicle is functioning properly
Click IMMO>> Step 1: OBD identify
Click “Help” to check the connection
Connect the Yanhua ACDP 2/ACDP to the vehicle’s OBDII port properly
Turn on the switch and continue
Verify the vehicle info
OBD identify info successfully
Step 2: Obtain IMMO data>> Load meter data calc IMMO
Prepare the ICP reading of the meter chip data
If the meter has an external EEPROM 95320/ 95128 chip, also need to prepare the external EEPROM data.
Select the NEC chip data for the instrument
When selecting the chip data, pay attention to the backup date, time and chip model
Confirm whether the meter needs to load the external EEPROM 95320/ 95128 data
Click “Yes” to load the EEPROM data
Calculate IMMO data and keep the network smooth during the process
Save the IMMO data after calculation
Check if the IMMO data is normal
Obtain IMMO data finish
Step 3: Make dealer key
Click “Help” beside [Duplicate the key] option
Connect Mini ACDP-2 to the PCF-KEY Adapter properly
Then click Duplicate the key
Note:
The new key should be a blank key that ID can be changed, and the blank key has been changed to the ID of the lost key.
Place the blank key that has been changed to the original car’s lost key ID on the PCF-KEY adapter correctly.
Confirm the key info
Select the IMMO data saved in step 2
Select car manufacturer- VW
Start programming the key data
Make dealer key successfully
Step 4: OBD learn key
Confirm the vehicle system info, and select IMMO data
Enter the number of learning keys
Don’t turn off the ignition during learning!
If the other keys are too close to the induction coil may cause the learning failure.
Put the first key close to or insert into the induction coil and continue
Learn the first key successfully, and use the same method to learn the 2nd key
Learn keys successfully!
Video Guide:
Read also:
How to Install Yanhua ACDP Module 33 for MQB48 Key Programming/ Mileage Correction?
How to Install Yanhua ACDP Module 33 for MQB48 Key Programming/ Mileage Correction?
How to Install Yanhua Module 33 MQB-80 Thumb Screw-Fastened Interface Board?
How to Install Yanhua Module 33 MQB-80 Thumb Screw-Fastened Interface Board?