Launch X431 IMMO Plus/IMMO Elite with X431 Key Programmer can generate remote and program smart key to 2023 KIA K5 (DL3) perfectly.
1.Read transponder: Confirmed
2.Detect frequency: Confirmed
3.Generate remote: Confirmed
4.Read data stream: Confirmed
5.Add smart key: Confirmed
Tips & Guide:
To perform the supported function, need to connect X431 IMMO Plus/Elite to the network, and update key programmer software to the latest version.
Connect X431 tablet, X431 Remote Maker, and vehicle correctly
Select [Update] to check if the software is in the latest version. If No, update it first. If Yes, go to next step.
1.Read transponder
Put the original car key into the coil of Launch Key Programmer to identify the chip info.
Remember the car key chip model after reading (It’s transponder 47)
2.Detect frequency
Select [Frequency detection], still put the original key into the key programmer coil, and press the key remote control button to identify the key frequency
3.Generate remote
Select Vehicle Remote>> KIA>> All remotes>> Optima (2015-2019) KeylessGo ID47>> Generate
Burn successfully
4.Read data stream
Select Kia immobilizer diagnostic software>> Immobilizer Key Matching
Detect VIN code successfully
Select General Area>> K5 (DL3) >> 2023>> IBU (Integrated Body Control Unit)-SMK>> Read Data Stream
Click on “Select All” to read data stream fast
5.Add smart key
Back to the last page, and select Special Function>> Smart Key Code Saving
Turn ignition off and prepare an FOB key to teach
Input 6 PIN code
Note: this function may be limited if the PIN code is entered incorrectly three times.
1st key teaching…press SSB (Start Stop Button) using 1st FOB within 5 seconds
Do not use your figner to press SSB, just use FOB itself
1st key teaching is completed, use the same method to teach the second FOB key
2nd key teaching is also completed.
Finally, test the remote function of two keys and check if the keys can start the car.
Done!
How to Upgrade and Setup Launch Tool to Work with X431 Key Programmer Remote Maker?
How to Upgrade and Setup Launch Tool to Work with X431 Key Programmer Remote Maker?