OBDSTAR released a new ECU Flasher software V30.80 for OBDSTAR DC706 ECU Tool and X300 Classic G3 Key Programmer on June 3rd, 2024. ECM ECU FLASHER SOFTWARE V30.80 MAJOR UPGRADE 1.Add Read/Write INT flash and Read/Write INT EEPROM functions for… Continue Reading
OBDSTAR DC706 with ECM V30.70 can read and write Volkswagen 7GV ECM EXT EEPROM (95320), read IMMO data and do IMMO OFF in Bench mode successfully. OBDSTAR P004 Adapter & ECU Clone Jumper, main cable and 12V power supply are… Continue Reading
Sometimes, Mercedes-Benz A-Class, B-Class, and GLA-Class vehicles may experience a situation where the car can be started but cannot be put into gears. This is caused by a loss of transmission ECU data due to a discharged car battery. The… Continue Reading
OBDSTAR DC706 with ECM V30.61 (newest) can read and write Flash and EEPROM data for Smart EDC16C32, EDG15C-5.X KLINE, ME17.9.20 and ME7.7.0 KLINE ECMs on Bench. Some support Boot and OBD modes as well. Check the support list below carefully. BRAND… Continue Reading
OBDSTAR DC706 with ECM V30.61 can read & write SUZUKI ECMs INT Flash/EEPROM and EXT Flash/EEPROM by Bench perfectly. OBDSTAR DC706 SUZUKI ECM Support List (Newest): BOSCH EDC16C34, EDC16C39, EDC17C49, ME17.9.5, ME17.9.51, ME17.9.61, ME17.9.64, MED17.9.63 DENSO 1.3, 1.5, 1.6, HA112700, JIMNY… Continue Reading
It has been tested and confirmed by OBDSTAR Tech that OBDSTAR DC706 ECU Tool has the ability to read and write VW SIMOS18.10 & SIMOS10.22 ECMs in Boot mode. It’s simple and fast to operate with the wiring diagram and instruction in the device system. Only… Continue Reading
Both OBDSTAR X300 Classic G3 and OBDSTAR DC706 support ECU cloning, what is the difference between them? OBDSTAR X300 Classic G3 Key Programmer: X300 Classic G3 is a comprehensive key programmer that can program IMMO keys, test remote, R/W transponder, make dealer keys/start keys,… Continue Reading
Great news!!! OBDSTAR will release a major upgrade in ECU Flasher software for OBDSTAR X300 Classic G3 Key Programmer and DC706 ECU Tool. Both add Volkswagen Bosch MED17/EDC17 one-click Dflash data conversion, MAZDA 3/ 5, and add IMMO Off function, etc. Update… Continue Reading
How about OBDSTAR DC706 ECU Tool? Compared with IO Terminal, any good? DC706 has full clone function. It supports ECM, TCM and Body/other system clone via OBD or Bench. It can read ECU info, R/W Eeprom/Dflash/Pflash/MAP, reset ECU (Virgin), calibrate… Continue Reading
OBDSTAR DC706 added VW ME17/MED17 Odometer Recalibration functions in the ECM V30.52 on Feb.22nd, 2024. The models include AUDI BOSCH MED17.1 TCI796 and VOLKSWAGEN BOSCH MED17.1 TC1796. OBDSTAR P003+ Adapter and 120ohm resistor are required to perform this function. Here takes VW… Continue Reading
Question: Is it possible to read and write Renault Siemens SIRIUS 32 ECM with OBDSTAR DC706? via OBD or bench? Here is the answer. Yes. DC706 ECU Tool can read and write some Renault ECMs via OBD/Bench/Boot. Not one… Continue Reading
