A 2012 Jeep Compass 2.2 diesel ECU with DCM 3.5. Actually it’s from Mercedes company 2.2 diesel, similar with CRD2. It’s 136 horsepower. It can’t be read via OBD or on bench, but it can be read/write with CG FC200… Continue Reading
How to use CG FC200 to read and write Volvo Denso MB279700xxx ECU? Check the tips and guide below. 1.Update your FC200 software to V1.1.7.0 or above FC200 V1.1.7.0 added Volvo Denso models MB279700-9500, MB279700-9801, and MB279700-9811 read and write function (platform) Free… Continue Reading
Here are some good ECU Programmers that support CONTINENTAL SID310 reading and writing: Xhorse Multi Prog, CG FC200, Alientech Kess3, Hexprog II. 1.Xhorse Multi-prog(Boot mode) Price: €755 (EU/UK Ship No Tax free shipping) Support Dacia, Renault, Opel, and Nissan SID310… Continue Reading
Xhorse Multi-Prog and CG FC200 are the best original ECU/TCU programmers under 1000 Euros. Both can read and write a wide range of ECUs, and also can read VAG MQB48 NEC35XX IMMO data and correct mileage, etc. What is the difference between them?… Continue Reading
Here are some best ECU programmers for beginner. It is advisable to use the original tool to ensure non-infringement, quality assurance, and tech support. Alientech KESS V3, CG FC200, OBDSTAR DC706, Launch X431 ECU & TCU Programmer, Launch X431… Continue Reading
CG FC200 ECU Programmer released the newest software V1.1.9.0 in March 2024. The BOSCH ST10 ECU and checksum function were added, as well as support for Denso ECU and other brand ECUs. A new button for “DTC off support list” was… Continue Reading
Customer problem: I want to change the language of my CG FC200 to Polish, but I get the prompt “The device is not licensed for this language, please contact the developer.” Does it mean Polish is not supported? How to… Continue Reading
CG FC200 Programmer released new update on Dec. 13th, 2022. New Engine and Gearbox ECUs added to the list. Free Download V1.1.0.0 Software: https://mega.nz/folder/iaZWxSKK#qUCFas1gnSK2EVAOgZGN0w/folder/eORQVCTQ New Update: 1.Added DELPHI platform and BOOT engine: CRD3.10, CRD3.E1, CRD3.F1, CRD3E.1, CRD3P.B0, CRD3P.C0, CRD3P.D1, CRD3P.G0,… Continue Reading
Which tool can read and write DSG gearbox data for VAG DQ200/DQ250 (02E)? Here recommend Godiag GT107 ECU IMMO kit, Kess V2, PCMTuner, Tactrix Openport 2.0 and CG FC200, which have been tested and confirmed all work well for VAG… Continue Reading
Topic: Is it possible to clone BMW MEVD17.2.5 DME N13 Engine by CG FC200 ECU Programmer? eobdtool.co.uk engineer has tested and confirmed it is 100% working by FC200. Here is the related video: STEP 1: Read and backup original… Continue Reading
CG FC200 supports intelligent recognition, module clone, ISN read and write, VIN modification and data processing for more than 98% of ECUs via BENCH mode and OBD mode, especially for BMW, Mercedes-Benz, Audi and VW. 1.CG FC200 ECU wiring diagram BMW… Continue Reading
