Here shares the solution to fix foxflash error “EXECUTE DOWNLOAD WITH DFBTech_UPDATER FOR TOOL RE-ESTABLISHMENT” when downloading the software to a new computer. The solution: Make sure the following items are performed: 1. Turn off Defender 2. Set Date/time… Continue Reading
OBDSTAR MT200 is a portable and cost-effective handheld radio decoding tool to perform EEPROM read & write, code read & change & off and other functions by OBD or Bench for Ford, VW, etc. The Pincode of Radio can be… Continue Reading
Foxflash ECU Chip Tuning Tool can support JTAG/BDM mode for Denso ECUs reading and writing. Just need to open the ECU and connect it with the JTAG/BDM adapter. Sometimes, it cannot work normally. The possible cause is the ribbon cable… Continue Reading
The Foxflash ECU Programmer can support FCA GPEC2 GPEC3 GPEC4LM GPEC2A ECUs read and write in Boot mode since March 14, 2023.Click here to check the detailed ECU models. Today we’ll share the Pinout to these ECUs. BAM SPC5674… Continue Reading
Is it possible to use Foxflash ECU Programmer to read and write Renault sid310? via OBD, bench or boot? Here is the answer. OBD and Boot mode both are OK. 1.OBD Driver for Renault Master SID310 is available… Continue Reading
Here are three new problems and solutions for Foxflash ECU Programmer. Problems: Problem 1: Value of 25/9/2022 is not valid for “Value” Problem 2: The application was unable to start correctly Problem 3: An error occurred while trying to… Continue Reading
xDecoder program allows you to find the error, in just a couple of clicks on the firmware file. You need to disable it with the DTC off error mask. xDecoder v10.3 software info: Date: 07/24/2022 Version: 10.3 Available in:… Continue Reading
The newest Foxflash software is released on March 14, 2023. Now it is able to perform the Continental GPEC2 GPEC3 GPEC4LM GPEC2A ECUs read and write in Boot. Update method: Try to update just connect, run Foxflash Manager and… Continue Reading
Some customers ask how to use Foxflash ECU programmer to clone Benz VGS3, Audi MED9.1, and VW MED17.1 successfully. Here are tips offered by eobdtool.co.uk engineer. 1.For Mercedes- Benz VGS3 (on bench) Use FoxFlash to copy the VIN and… Continue Reading
If you can open Foxflash/New KT200 software normally, but cannot select driver, language, etc, just follow the method in this post to solve the problem. The solution offered by eobdtool.co.uk: Both Foxflash ECU programmer and New KT200 ECU Chip… Continue Reading
Foxflash new update on March 3rd, 2023: Ducati install Bosch ME17.9.21 can easy read & write now. How to update? Run the foxFlash Manager software, and click the Download button till all is done. After upgrade, foxFlash ECU programmer… Continue Reading
